The wall printer manufacturer behind WallPrintBox — built, audited, and shipped from one in-house production line since 2018.

An in-house wall printer manufacturer audited by 47 international partners across MENA, LATAM, SEA and EU. Walk through our floor, talk to our engineers, see the spare-parts shelves — then decide.

Apply for OEM Partnership Book a Factory Tour Call

Average response from our partner desk: under 4 business hours, 11 languages.

One in-house production line. 4 assembly bays, 30 stations, 120 to 180 units shipped every month.

We do not subcontract assembly. Every wall printer that ships under the WallPrintBox name — GP200X, GP200I, GP22L — moves through the same 4-bay line in the same building, under the same QC team.

Production-line wide shot looking down the row of 4 assembly bays at the WallPrintBox wall printer factory, with workers in branded jackets Close-up of a workstation showing technician's hands aligning a Y-axis rail on a half-assembled WallPrintBox V2 Pro wall printer chassis

4 production lines — frame welding, mainboard install, printhead alignment, full integration; physically separate bays in the same hall.

30 dedicated workstations — each station owns one assembly step, signed off before the unit moves down the line.

Annual capacity 1,800 units — we shipped within this band every year from 2021 onward.

Dedicated burn-in room — 24-hour continuous-print test bay for every single unit before crating.

120 to 180

units shipped per month — same range we have held since 2022.

Monthly output range is published, not advertised. We turn down rush orders that would push us above 180 — quality holds, or we do not ship.

ISO 9001, 5 QC checkpoints per unit, and a 24-hour burn-in room every printer has to survive.

We work to an ISO 9001 quality manual that defines 5 inspection points between raw component and crated unit. Last year, our outbound defect rate — units that arrived needing remediation — sat under 2%.

1
Incoming material check
Printhead, mainboard, motors verified against batch ID before they enter assembly.
2
In-line assembly QC
Sign-off at each of the 30 stations, no part moves without a stamp.
3
24-hour burn-in
Every unit runs continuous print patterns for 24 hours; failures go back to bay 4.
4
Full-machine performance test
Calibration, speed, dpi, color accuracy verified against GP200X / GP200I / GP200L spec sheet.
5
Pre-crate visual + accessory audit
Kit completeness, cosmetic, packing checklist signed by line lead before sealing.
ISO 9001
Quality management system in active use, TÜV-equivalent third-party validated.
24 hours
Minimum continuous-print burn-in every single unit must complete.
Under 2% defect rate
Outbound defect rate measured as units flagged within 30 days of partner receipt.

OEM wall printer program in 6 documented steps. MOQ 5 units for sample, 4 to 6 weeks for mass production.

Every OEM wall printer and white-label deal we sign follows the same 6-step process below. The MOQ, the timelines, and the customizable surfaces are published — you do not have to email three times to get a straight answer.

A labeled OEM wall printer sample on the packing bench — a V2 Pro chassis with a partner's logo silkscreened and a branded crate next to it
1

Inquiry

You send target market, branding direction, expected annual volume. We reply within one business day.

2

Quote + spec lock

We send the OEM rate card (logo, packaging, software UI, boot screen, documentation translation) and you confirm scope.

3

Sample build

2 to 3 weeks — one branded unit produced on the same line as mass production, identical QC, shipped DDP or EXW per your choice.

4

Sample approval + deposit

Once you have run print tests on the sample, 30% deposit triggers mass production scheduling.

5

Mass production

4 to 6 weeks — your batch slots into the same 4-bay line, with batch ID traceable to every QC station.

6

Shipment + after-sales

Balance paid against shipping docs, your dedicated partner-desk contact takes over for first 90 days.

Logo

Silkscreen, laser engrave, or printed plate on chassis + on touchscreen splash.

Packaging

Your crate art, manual cover, accessory pouch branding, multilingual quickstart card.

Software UI

Boot screen, primary language, partner-branded splash, optional white-label slicer skin.

Documentation

Full manual, safety sheet, warranty card translated into your local language (5 languages on-hand, others on quote).

MOQ 5
Units for the sample stage — lowest MOQ in this category we are aware of.
2 – 3 wk
Sample lead time, confirmed in writing on the quote.
4 – 6 wk
Mass production — held within range on every batch since 2022.

Five service commitments we make to the partners we sign, not to the end users they sell to.

Our end-user service guarantees (12-month warranty, 7-day transit damage cover, spare-parts shelf) sit on the homepage. Below are the 5 commitments we make to the dealer or OEM brand we sign with — different audience, different commitments.

5-year spare parts supply

For every model you take on as a partner, we hold parts on-shelf for 5 years from your contract start, in writing.

4-hour response SLA

Your partner-desk ticket gets first reply within 4 business hours, across GMT-6 to GMT+8, 5 languages.

5 in-house languages

English, Spanish, Arabic, Portuguese, French handled by our own team; additional languages by scheduled interpreter on quote.

Annual partner training

One online or on-site engineer-led training round per partner per year, covering new firmware, accessory lines, and common service cases.

OEM documentation support

Translated manuals, partner-localized warranty cards, marketing-asset source files released to signed partners on request.

2018
Year the production line was commissioned
47
Countries with partner sites we currently ship to
120 – 180
Units shipped per month, held since 2022

Six years, six milestones — how a one-line wall printer factory grew into a 47-country partner network.

Not a brand story. A production-line story: when the line was commissioned, when capacity scaled, when we opened the OEM channel, when we crossed 47 countries.

2018

Production line commissioned

First V1-class wall printer shipped to a domestic test partner in Q4 2018.

2020

Scale-up to current 4-bay layout

Added the dedicated burn-in room and ISO 9001 quality manual in the same year.

2021

First export contracts across SEA and MENA

Annual export volume crossed 1,000 units for the first time.

2022

First-time-buyer partner program opened

Full crated kit (machine, software, ink, spare parts, training, partner marketing assets, post-sale tooling) became standard on every partner shipment, not an extra-cost upgrade.

2023

OEM / white-label channel formalized

Published MOQ, timeline, and customizable surfaces on a rate card; first long-term OEM partners signed across LATAM and EU.

2024

Crossed 47 countries under partner contract

Opened the 5-language partner desk with 4-hour SLA.

Four teams behind every wall printer we ship — and the partner desk that picks up your phone.

Around 40 people across production, engineering, QC and partner support, working out of one building. No outsourced support, no white-label call center. Below is who actually does the work.

Wall printer factory production line worker assembling a chassis on the bay 1 frame welding station

Production team

~22 people

Across the 4 assembly bays, led by a production manager with 8+ years on wall-printer assembly lines.

Wall printer firmware engineer at a dual-monitor workstation reviewing a firmware build

Engineering team

~8 people

Split between hardware (mechanical / printhead / electronics) and software (firmware / slicer / UI). Every OEM customization runs through here.

Quality control technician with caliper and inspection sheet next to a WallPrintBox wall printer unit

QC team

~5 people

Separate reporting line from production. Owns the 5-checkpoint flow and the 24-hour burn-in sign-off.

Multilingual partner-desk support staff at a headset workstation with a multilingual ticket queue on monitor

Partner-desk team

~5 people

Covering English / Spanish / Arabic / Portuguese / French, 4-hour SLA across GMT-6 to GMT+8.

Time zones covered: GMT-6 (LATAM) → GMT+8  ·  Languages: 5 in-house  ·  Escalation: Engineer-to-partner escalation route published on every signed contract.

Walk the floor before you sign — 6-minute factory tour video and 6-photo deep walkthrough.

Filmed in one take inside our own building. No cuts between rooms, no off-site shots, no rented floor. Same line we use for V1 Starter, V2 Pro and 3D Mural production.

Factory walkthrough poster frame from the WallPrintBox wall printer production line
Walkthrough video — request via the Factory Tour Call CTA below
Bay 1 — frame welding station with a full row of incoming wall printer frames
Bay 1 — frame welding station, full row of incoming frames
Bay 2 — mainboard install station with anti-static benches
Bay 2 — mainboard install, anti-static benches
Bay 3 — printhead alignment workstation with calibration jigs visible
Bay 3 — printhead alignment, calibration jigs visible
Burn-in room wide angle with 6 wall printer units running continuous print tests
Burn-in room — wide angle, 6 units running continuous print test
Spare-parts mezzanine with labeled shelves and batch-ID tagged inventory at the wall printer factory
Spare-parts mezzanine — labeled shelves, batch-ID tagged inventory
Loading dock with crated wall printer units staged for export and shipping documentation
Loading dock — crated units staged for export with shipping documentation

Want to walk the floor in person? Use the next section to book a real tour.

You have walked our floor, met the team, seen the capabilities. The next step is your OEM application.

Two ways forward — apply for the OEM channel and get the rate card in your inbox, or book a 30-minute live factory tour call with one of our engineers.

Apply for OEM Partnership Book a Factory Tour Call

Partner-desk first reply target: under 4 business hours, 5 languages.

Three partner regions, three different starting points, the same supplier for the long haul.

We do not publish partner names on a public page — partners do not always want their dealer pipeline disclosed publicly. What we can publish is the shape of each long-term relationship: where the partner sells, where they started, where they are now, and how long we have shipped to them under one contract.

MENA regional distributor

  • Started: 2021, 30-unit trial order on V1 Starter
  • Current run rate: ~150 units / quarter across V1 and V2
  • Contract length: 4 years under one supply contract
  • Touch point: Co-marketing kit + Arabic-language manual on every shipment

LATAM brand-house OEM

  • Started: 2022, 5-unit OEM sample run on V2 Pro under their own logo
  • Current run rate: ~80 units / quarter, full white-label including boot screen and Spanish UI
  • Contract length: 3 years under one OEM contract
  • Touch point: Spanish UI + boot-screen white-label on every batch

SEA dealer

  • Started: 2020, 20-unit dealer order on V1 Starter
  • Current run rate: ~60 units / quarter, added 3D Mural to portfolio in 2024
  • Contract length: 5 years under one dealer contract
  • Touch point: Annual on-site training round each November

These three are public-shape snapshots of real long-term partner contracts. Individual partner identities and contract specifics are shared under NDA in the OEM application step.

Four certifications that cover the markets our 47 partner countries actually ship into.

We hold CE, FCC, ISO 9001 and RoHS — all four under TÜV-equivalent third-party validation. The badges below show the scope each one covers and the export markets that ask for it.

CE

CE

Electromagnetic compatibility and low-voltage directive for wall printer assemblies.

Primary market: European Union

FCC

FCC

Radio frequency emission compliance for wall printer electronics.

Primary market: US & Canada

ISO

ISO 9001

Quality management system covering design, assembly, QC and after-sales.

Scope: Global — used in partner ISO audits

RoHS

RoHS

Restriction of hazardous substances in printer electronics and consumables.

Primary market: EU + MENA/LATAM

All four certifications are TÜV-equivalent third-party validated. Certificate copies are released under the OEM application step rather than published publicly, in line with standard partner-desk practice.

Three ways to move from supplier background-check to signed partnership.

Pick the door that matches where you are. The OEM application gets you the rate card and a partner-desk owner. The factory tour gets you 30 minutes with an engineer. The general inquiry gets you a same-day human reply for everything else.

Apply for OEM Partnership Submit the form, get the OEM rate card and partner-desk owner assigned within one business day.
Book a Factory Tour Call 30-minute video call with one of our engineers, walking through whichever room you want to see again.
Send a general inquiry Anything not covered above, same-day human reply from our partner desk.

First reply target: under 4 business hours during partner-desk hours (covers GMT-6 to GMT+8). After-hours submissions get next-business-day priority.